Water Softener Problems And Solutions
A water softener is a good factor for anybody having with hard water. The system is very complex, and any machine goes wrong for such case. So the manufacturer company provides technical assistance in such cases.
The system is inexpensive, and it will solve many problems easily. If you see uncertainty, take help from the technicians. By doing this, any warranty will not be invalid. Everyone should know the Common Water Softener Problems to avoid non-functionality of the water softener.
These are the common issues that are seen in salt based water softener system. However, usage and maintenance, proper care, they happen rarely. Besides, you have a warranty.
Water Softener Not Working Properly
There are some possible causes for which the softener does not function properly. These are very easy to resolve. The first way is to flush the tank by the water softener method. The method allows you to add more system. Use more salt or then fill the tank.
When you see the motor is not working, see the plugin or the unit is switched on. Besides, check the circuit breaker whether it has been tripped. These are the main advice. The other problems and solutions are very simple. If it is a motor problem, you will better to take advice from the professionals.
Common Water Softener Problems
Any system can face the blockage problem at the time of flowing through it. When minerals accumulate or salt stored may create a blockage in the system. These deposits block the way of the water meaning that the paths of water flow are uneven or impeded. The most common blockages of the filters are the brine line and the filters screen.
If there is a blockage in the softener, it has considerable degrees of water. You will get the details about fix blockage of the unit in the manual book. The blockages are very simple to remove from the softener.
Besides forming the lines, sometimes salt can be stored in the tank. Most of the cases a salt bridge will be seen. The reason is hard piles of deposits on the base of the tank.
The softener is working, but the water is not softening, there might be a salt bridge on the way. The salt bridge is a hard crusting of salt which covers water. A salt bridge prevents the system from working properly through a regeneration cycle.
If the salt bridge is identified once, it is easy to fix. The solution is much easier. Use a sturdy like as a broom handle to enter the tank and break the salt. Any salt that is stored around the edge is possible to clean up.
The salt based water system uses Resin beads. The resin will remain with your system as long as the system remains. They can be breaking down or do not work with full potential. When you need the frequent change of the resin be sure that the resin beads do work well.
The other way to determine the resin is looking to the particles floating in the softened water. If you see the water transport small parts from the bead, be sure resin needs to change. The details about this are presented on your manufacturer manual book.
The motor is a major factor for every water softener. The motor of your water softener is not very different from the motor of your car. Sometimes it may fail to do its function.
When you see the system is not running, the cause may be with the motor. Coming to a determination, you have to check all the cables are damaged or not. When you finish all checking and do not get result consult with a technician or manufacturer. Before buying a new motor consider the price of the new brand.
A system that depends on the manual process or individual inputting setting is bound to go wrong for the users’ error. There are some easier softeners that other. There are many settings which are perfect for various circumstances. The small change sometimes makes the softener problematic.
On the brine line, the problems frequently occur of the water system. You can solve the problem by reddening the brine line. To do so, you need to notice the filters screen and injector, replace them if you see any problem or defect.
You have to check the lines as it may affect the pressure of the lines. To work well on the brine line, the system wants accurate pressure. The pressures are shown in details in your manuals. They have shown the way to adjust the temperature. For a water softener, the brine line is a great factor. So for good performance use accurate pressure.
There is a limit of ion content in the water of the water softener. So you should check the filter. What is the reason to check the filter before starting it? You should replace the filter. To see the bypass valve, take a long time. You can look at the plumbing lines to be sure there is no leak there.
Water softener not using salt
A good solution is to use a RUBBER MALLET. You may use the mallet once a month and therefore softly tap on the lower position of the brine tank space about ten to fifteen inches up from the bottom of the tank.
When is the best time to use a rubber mallet? As there is a salt bridge, it drops down to fill the nadir of the salt component. This may lead you to go back on the track by giving the required salt to refresh or clean the resin of the water softener.
If you get this occurs in your water softener, better to begin a manual cleaning or regeneration cycle at least two days in a succession or row.
Water softener problems brown water
The water you get has discoloration, do not drink this water. Check the local utility for different types of information. It would be the issue of cities pipes or for the distributions lines and may affect the condition of the water in your home. As you have no issue with the local water provider, you may get troubleshoot your interior water pipes of your homes.
Water softener problems salty taste
It would seem that the section of the cycle which rinses the brine solution may not happen. The valve which is responsible for this cycle and operation the machine by its various cycles may turn a circle.
It fails to skip the stages mechanically without any command. I think there are some kinds of a momentary power failure at an inopportune moment; the drain hose which runs out of the system is plugged.
As the softener was cycling, the power was momentarily cut the unit and the brine flush stage. It may come back on and cycle the normal use setting. The brine may not flush out the resin tank, and the description which you have given may be the aspired result.
It may be caused by wall outlet power being momentary, wires from the transformer being frayed or damaged and the dirty connectors on the circuit board where transfer hooks up. Move ahead and verify the condition of the wire and notice the terminals on the board.
A diagram of the end of the replay shows the value drain hose.