How To Remove Salt From Saltwater
Please do not think me. It is not possible for a human to drink saline water. But the reality is that saline water is made into freshwater that is the aim of the inflatable and portable solar still. The system is known as desalination.
The process is widely used more and more around the world to give people with needed fresh water. Most of the United States has ample supplies of fresh water for drinking purposes.
Fresh water may be supply in few parts of the country. People are growing all over the world, and there is the shortage of fresh water more often for some locations. For some areas, salt water is not being turned to fresh water for drinking purposes.
The normal hurdle which can overcome to alter seawater into fresh water and removes dissolved salt from seawater. It may seem very simple since boiling seawater in a pan, condensing steam and capturing it back to water.
Other procedures are found but the present procedures may be done on the large scale to be essential to large populations, the present processes are costly, energy intensive and require big scale facilities.
What makes water saline?
What do you know about saline water? The answer is that the saline water contains a lot of dissolved salts. In such case, the attention is the amount of salt in water since stated in parts per million. As water has absorption of 10,000 ppm of mixed salts, 1% of the heaviness of water comes from dissolved salts.
Under we have parameters for the saline water
- Slightly saline water – From 1,000 ppm to 3,000 ppm
- Moderately saline water – From 3,000 ppm to 10,000 ppm
- Fresh water – Less than 1,000 ppm
- Highly saline water – From 10,000 ppm to 35,000 ppm
- By the way, ocean water contains about 35,000 ppm of salt.
The system of altering salt water to drinking water permit you to distill bit more water though you use quite bit energy. It applies the similar theory for an alcohol still. You have to use a metal bottle or heat resistant glass, rubber or cork, a catch basin and a few feet of tubing.
- Fill the bottle with water and keep some space to the top of it.
- Create a big hole in the piece of cork or rubber just big enough to fit the tubing to the right position.
- Put the tube in the seal or cork so that it may even with the underneath of the cork, keep the cork on the top of the bottle.
- Rinse the tubing to another container which is lower than the bottle as the water goes out of it and not within the bottle.
- Keep the bottle on the heat source; be careful not to get your tubing warm.
- Lead water to the boiling position and see the steam comes out of the water, through the tubing alters back to water since it drips out to the end of the tube of the container.
Just a hint: As you have a teapot, you can add the tubing to the spout. Similar approach.
Using a Pot and Stove
Get a big pot with a lid and an empty drinking cup. The glass might be big enough to keep a fair amount of fresh water.
- Be sure the glass is shorter enough to keep the lid on pot
- A metal or Pyrex cup is safest since some kinds of glass may explode as exposed to warmth. Plastic can deform or melt.
- Be confirm the pot, and the lid is perfect for using on the stove
Slowly pour some salt water into the pot. Do not overfill.
- You do not like to enter any salt water into the drinking glass or recently made fresh water can be contaminated.
- It will confirm you that no salt water splatters in the glass at the time of boiling
- Carefully stop before the water level goes to the mouth of the glass.
Place the pot, cover upside down on the pot. This permits the water vapor since it concentrates to trickle into the drinking glass.
- Keep the pot lid to the highest position as the handle is facing down thoroughly over the glass.
- If there is no good seal, a huge amount of steam will come out and lessen the collection of pure water vapor.
- Be sure the pot lid is giving a wonderful seal to the edges of the pot.
Bring the water to a slow boil. You like to have boil water slowly by using low heat.
- A violent or rapid full boil may pollute or contaminate drinking water by splashing in the glass.
- More heat may be the cause of breaking the glass
- Since water is boiling violently and very quickly, the glass can shift away from the middle of the pot and the grip of the pot lid.
Watch the pot as the water condenses. If water boils, it creates pure vapor, keeping behind anything which is mixed in it.
- Since water turns into vapor, it concentrates in the air as steam and on the cover’s top when water droplets.
- The droplet goes down to the lower position and drips right inside the glass.
- The process can take twenty minutes or more than that.
Wait a while before drinking the water. Both the glass as well as water will be hot simultaneously.
- It may be that little amount of salt will remain in the pot at last. Therefore be careful at the time of eliminating the glass of clean water, not to splatter any salt into your fresh water.
- You will get that he fresh water and the glass become cool faster when you replace it from the pot.
Be conscious since you eliminate the glass as you are not injuring by brunt. Apply a potholder or oven mitt to take it out.